Changing The Opening Direction Of The Doors - AEG SANTO Operating Instructions Manual

Changing the opening direction of the doors

Before carrying out any operations, remove the plug from the power socket.
To change the opening direction of the door, proceed as follows:
1. Remove the upper hinge and the upper support
taking
care for the upper door not to fall off ;
2. remove the upper door;
3. unscrew the middle hinge. Unscrew the plastic plugs
located on the opposite side of the central hinge and
introduce them in the holes occupied before by the
hinge;
4. remove the lower door;
5. pull off the ventilation grille which is fixed by two
screws;
6. remove the bottom hinge by unscrewing its fixing
screws;
7. using a 12 mm spanner, unscrew the hinge pin and
reassemble it on the opposite side of the hinge;
8. adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers or a tool;
9. reassemble the lower hinge on the opposite side,
using
the screws previously removed. Slide the hole cover out
of the ventilation grille by pushing it in the direction of
the arrow and reassemble it on the opposite side;
10. refit the ventilation grille , fixing the screws;
11. reassemble the lower door;
12. reassemble the middle hinge on the opposite side;
13. replace the upper door.
14. In your documentation bag you will find the upper
hinge
and the upper support necessary to make the reversibility. Please mount them
in
their relevant place.
15. Depending on the model:
Model with bar handle
Dismantle the handles and reassemble them on the opposite side. Cover the holes
with the plastic lids that were situated where the handles are presently.
33