Download Print this page
Dimplex Brayford BFD20 Installation And Operating Instructions

Dimplex Brayford BFD20 Installation And Operating Instructions

Brayford log stove; springborne coal stove

Advertisement

Brayford Log Stove
Springborne Coal Stove
440
547
Brayford
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Important Safety Advice:

When using electrical appliances, basic precautions
should be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following :
If the appliance is damaged, check immediately
with the supplier before installation and operation.
Do
not
use
this
surroundings of a bath, shower or swimming pool.
Do not use outdoors.
This heater must not be located immediately below
a fixed socket outlet or connection box.
Do not cover or obstruct in any way the heat outlet
grille located at the bottom of the heater.
Overheating will result if the heater is accidentally
covered.
Ensure
that
furniture,
combustible materials are positioned no closer
than 1 metre from the heater.
In the event of a fault unplug the heater.
Unplug the heater when not required for long
periods.
Keep supply cord away from the front of the
heater.
Although
this
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
This appliance is not intended for use by children
or
other
persons
supervision if their physical, sensory or mental
capabilities prevent them from using it safely.
Children should be supervised to ensure that they
do not play with the appliance.
The appliance must be positioned so that the plug
is accessible.
If the supply cord is damaged it must be replaced
by the manufacturer or service agent or similarly
qualified person in order to avoid a hazard.
Model: BFD20
Model: SBN20
295
controls
Model: BFD20
heater
in
the
immediate
curtains
or
heater
complies
with
without
assistance
Installation and Operating Instructions
547
General
General
Unpack the heater carefully and retain the packaging for possible
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the fire to your
future use, in the event of moving or returning the fire to your
supplier.
supplier.
This model is designed to be free standing and is normally
This model is designed to be free standing and is normally
positioned against a wall.
positioned against a wall.
A choice of 1kW or 2kW heat output is provided by the fan heater,
A choice of 1kW or 2kW heat output is provided by the fan heater,
which is located at the bottom of the unit.
which is located at the bottom of the unit.
Before connecting the heater check that the supply voltage is the
Before connecting the heater check that the supply voltage is the
same as that stated on the heater.
same as that stated on the heater.
On the Springborne model loose coals are packed separately within
On the Springborne model loose coals are packed separately within
the carton. When the heater is assembled the coals can be placed
the carton. When the heater is assembled the coals can be placed
on top of the fuel bed, as required.
on top of the fuel bed, as required.
Please note: Used in an environment where background noise
Please note: Used in an environment where background noise
is very low, it may be possible to hear a sound which is related
is very low, it may be possible to hear a sound which is related
to the operation of the flame effect. This is normal and should
to the operation of the flame effect. This is normal and should
not be a cause for concern.
not be a cause for concern.
Electrical
Electrical
WARNING: THIS APPLIANCE MUST BE EARTHED.
WARNING: THIS APPLIANCE MUST BE EARTHED.
other
This fire is suitable for operation on an AC~ electricity supply having
This fire is suitable for operation on an AC~ electricity supply having
the same voltage as that shown on its rating label.
the same voltage as that shown on its rating label.
In the event of replacing the fuse supplied, a 13 amp fuse approved
In the event of replacing the fuse supplied, a 13 amp fuse approved
by ASTA to BS 1362 must be used.
by ASTA to BS 1362 must be used.
If the socket outlets in your home are not of the 13 amp BS1363
If the socket outlets in your home are not of the 13 amp BS1363
type they will not accept the plug connected to this heater, therefore
type they will not accept the plug connected to this heater, therefore
cut off the plug.
cut off the plug.
hazard if inserted into a socket outlet. It must therefore be disposed
hazard if inserted into a socket outlet. It must therefore be disposed
of safely.
of safely.
Before wiring the appropriate plug please note that the wires in this
Before wiring the appropriate plug please note that the wires in this
safety
mains lead are coloured in accordance with the following code.
mains lead are coloured in accordance with the following code.
GREEN/YELLOW -
GREEN/YELLOW -
BLUE -
BLUE -
BROWN -
BROWN -
or
Connect the Green/Yellow wire to the terminal marked 'E' or the earth symbol
Connect the Green/Yellow wire to the terminal marked 'E' or the earth symbol
coloured Green or Green/Yellow.
coloured Green or Green/Yellow.
Connect the Brown wire to the terminal marked 'L' or coloured Red.
Connect the Brown wire to the terminal marked 'L' or coloured Red.
Connect the Blue wire to the terminal marked 'N' or coloured Black.
Connect the Blue wire to the terminal marked 'N' or coloured Black.
DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the
DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the
Earth terminal of your 13 amp plug. If the terminals of the plug are
Earth terminal of your 13 amp plug. If the terminals of the plug are
unmarked or you are in any doubt, consult a qualified electrician.
unmarked or you are in any doubt, consult a qualified electrician.
CAUTION: If you use this heater in conjunction with a thermal
CAUTION: If you use this heater in conjunction with a thermal
control, programme controller, timer or any other device which
control, programme controller, timer or any other device which
switches the heater on automatically observe all safety warnings at
switches the heater on automatically observe all safety warnings at
.
.
all times
all times
440
Springborne
Model: SBN20
When cut off this plug can constitute a shock
When cut off this plug can constitute a shock
EARTH
EARTH
NEUTRAL
NEUTRAL
LIVE
LIVE
08/18740/3
Issue 3
295
controls
Fig. 1
Fig. 1
or
or

Advertisement

loading

Summary of Contents for Dimplex Brayford BFD20

  • Page 1: Important Safety Advice

    Installation and Operating Instructions Brayford Log Stove Model: BFD20 08/18740/3 Issue 3 Springborne Coal Stove Model: SBN20 controls controls Brayford Springborne Model: BFD20 Model: SBN20 Fig. 1 Fig. 1 IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE...
  • Page 2: Lamp Replacement

    Hampshire. SO30 2DF Republic of Ireland Tel. 01 8424833 [c] Glen Dimplex UK Limited All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.

This manual is also suitable for:

Springborne sbn20Clb20Rit20Tango stove tng20Jaz20