Advertisement
SAFETY INSTRUCTIONS
In order to avoid damage to hardware or electronic components, during unit use and/or maintenance, It
is necessary to follow the safety instructions.
Prior to installing the unit, please read this manual carefully. Follow all instructions and keep it for further
reference.
Manipulating or opening the unit may cause damage to people. -Place the unit in a location protected
from weather and in a good distance from water and moisture. -Don't expose the unit to sources of heat,
such as radiators, spotslamps, hot power amplifiers etc.. -Avoid any kind of liquid entering inside the
unit. -Connect the unit to a power supply line able to support the units power consumption. The power
supply line must be in good operating conditions. The power supply line must have an efficient ground
line. -Disconnect the unit from a.c. power socket during thunderstorm (lightning) or when out of use for
long periods of time.
Leave any servicing to qualified service personnel only. Servicing is required when the apparatus has
been damaged in any way, such as: -Defective connectors -Liquid has spilled inside the unit. -The unit
has been dropped or has been mechanically or electrically damaged or if the personal password of the
user has been forgotten.
No user-serviceable parts inside. For service, refer to an authorized maintenance.
The ZX406PA mixer amplifier complys with EMC Directive 89/336/CEE (Directive on approximation of
member nation's ordinance concerning the electromagnetic compatibility) and following modifications
92/31/CEE and 93/68/CEE, as stated in EN 500821:1997, EN 55013:1990, EN 55020:1994 standards.
The unit complys to Low Voltage Directive 73/23/EEC (Directive on approximation of member nation's
ordinance concerning electric equipment designed to be used within the specified voltage range), and
following modifications 93/68/CEE, as stated in EN 60065:1998 standard. To avoid electric shock don't
open this unit. To prevent risks of fire and/or electric shock, don't expose this unit to rain or moisture.
PACKAGING
This unit package has been submitted to ISTA 1A integrity tests. We suggest you check the unit immedi-
ately after unpacking it. If any damage is found, immediately inform the dealer. Keep all unit packaging
parts to allow inspection. Our company is not liable for any damage that occurs during shipment.
SHIPMENT / TRANSPORT LOSS OR DAMAGE
Products are sold and shipped ex warehouse and the shipment is at charge and risk of the buyer. Possib-
le damages to the unit should be immediately notified to the forwarder.
WARRANTY AND PRODUCT RETURN
BELL Audio Systems warrants all materials, workmanship and proper operation of this product for a peri-
od of two years from the original date of purchase. If any defects are found in the materials or workman-
ship or if the product fails to function properly during the applicable warranty period, the owner should
inform the dealer or the distributor, providing receipt or invoice of date of purchase and a detailed de-
scription of the defect(s). This warranty does not extend to damage resulting from improper installation,
misuse, neglect or abuse. BELL will verify damage on returned units. If the unit has been properly used
and warranty is still valid, the unit will be replaced or repaired. Our company is not responsible for any
„direct damage" or „indirect damage" caused by any defective product.
INSTALLATION
Product should be installed abd operated in a professional 19" standard rack with adequate ventilation.
DISCLAIMER
BELL products have been expressly designed for audio application, with signals in audio range
(20Hz to 20kHz). Our company is not liable for damages caused by lack of mainte-
nance, modification, improper use or improper installation or by ignoring safety instruc-
tions.
BELL reserves the right to change technical specifications at any time without notice.
Advertisement
