Download  Print this page

Troubleshooting - Black & Decker CS1014 Instruction Manual

7-1/4” (184mm) circular saw
Hide thumbs

Advertisement

Table of Contents
for their specific return policy regarding
returns that are beyond the time set for
exchanges.
The second option is to take or send the
product (prepaid) to a Black & Decker
owned or authorized Service Center
for repair or replacement at our option.
Proof of purchase may be required.
This warranty does not apply to
accessories. This warranty gives you
specific legal rights and you may have
other rights which vary from state to
state or province to province. Should
you have any questions, contact the
manager of your nearest Black & Decker
Service Center. This product is not
intended for commercial use.
free warning Label Replacement: If
your warning labels become illegible or
are missing, call 1-800-544-6986 for a
free replacement.
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.

TROubLEShOOTiNg

Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Black
& Decker service center or
authorized servicer.)
• Have cord or switch replaced
at Black & Decker Service
Center or Authorized Servicer
10

Advertisement

Table of Contents
loading

  Also See for Black & Decker CS1014

  Related Manuals for Black & Decker CS1014