WATCHING TV / CHANNEL CONTROL
MAGIC MOTION REMOTE CONTROL FUNCTIONS
ENTER
VOL
CH
MUTE
RF Specification of the Magic Motion Remote Control
The Magic Motion Remote Control communicates with your TV by using a 2.4 GHz bandwidth radio
frequency (RF).
Output: 1 dBm or lower
Maximum Communication Distance: 10 m (30 ft) in an open space
Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz)
Transfer Rate: 250 kbps
58
Pointer Receiver
Blinks the light when operating.
POWER
Turns the TV on from standby or off to standby.
ENTER/HOME
Activates the pointer.
Menu Button
VOLUME UP/
Adjusts the volume.
DOWN
CHANNEL
Changes the channel.
UP/DOWN
MUTE
Switches the sound on or off.
Installing Batteries
When the message "Magic motion
remote control battery is low. Change
the battery." is displayed, replace the
battery.
Open the battery compartment
cover on the back side and install the
batteries matching correct polarity.
Install two 1.5V AA batteries. Don't
mix old or used batteries with new
ones.
Close cover.