Making A Call To A Phone Number In Memory; If You Become Unsure Of An Operation; Voice Command List - Pioneer Premier DEH-P710BT Operation Manual

Using voice recognition
! You can also input a phone number in parts.
When inputting 01234 and 56789 separately,
say the next part of the number (56789) after
you hear 01234 Please complete the num-
ber. Otherwise say "Dial" or "Correction".
! When you want to correct a phone number,
say Correction and then say the correct
phone number after you hear the beep tone.
When you are inputting a phone number in
parts, you can correct the part of the number
you said last. If you input 55555 when you
should have input 56789, say Correction
when you hear Please complete the number.
Otherwise say "Dial" or "Correction"., and
then say the correct number.
Making a call to a phone
number in memory
You can also use voice recognition to make a
call to a phone number stored in the memory.
This explanation uses the example of making
a call to the cellular phone of Sandy Jones.
1 Start voice recognition.
Refer to Using voice recognition on the pre-
vious page.
2 Say Call Sandy Jones.
You will hear On which number do you
want to call <name>, <type>., and then a
beep tone.
# In the case of when there is only one phone
number corresponding to the registered name
(Call Sandy Jones), say Dial to make the phone
call.
3 Say mobile.
4 If the read out name (Sandy Jones) and
type (mobile) are correct, say Yes after you
hear the beep tone.
5 A call is made to the number read out.
Notes
! Saying Call Sandy Jones mobile in Step 1 al-
lows you to specify the name and type in one
go.
! If a type that is not registered is specified
when a type is specified, an error occurs and
the unit waits for a voice command to be said.
Say a correct voice command.
If you become unsure of an
operation:
If you become unsure of a voice command
partway through an operation, access the
help.
1 Start voice recognition.
Refer to Using voice recognition on the pre-
vious page.
2 Say Help or What can I say?
3 The help voice guidance plays, and the
voice commands you can use are
pronounced.

Voice command list

Command Type Operation
Use this when you want to di-
rectly specify a phone number.
Dial (number)
A number of up to 32 digits can
be read out.
Use this when you want to spe-
cify a number to add to the
number specified with Dial
(number). (You can also specify
(Number)
a phone number in parts.)
! 0 to 9, *, # and + can be en-
tered.
Section
09
41
En