Basic Playback - Mitsubishi Electric DX-TL2500E Operation Quick Manual

6. Turn the JOG dial to select "0.313P" and turn the SHUTTLE
ring clockwise.
• Setting is confirmed and flashing stops.
<RECORD SETTING>
NO PPS
1 0.313P
2
1.563P STD
3
1.563P STD
4
1.563P STD
5
1.563P STD
6
1.563P STD
7
1.563P STD
8
1.563P STD
9 1.563P STD
NEXT PAGE
7. Turn the JOG dial clockwise to reverse display "GRADE"
and turn the SHUTTLE ring clockwise.
• The background of the "GRADE" setting turns red and
flashes.
<RECORD SETTING>
NO PPS
1 0.313P STD
2 1.563P STD
3 1.563P STD
4
1.563P STD
5
1.563P STD
6
1.563P STD
7 1.563P STD
8
1.563P STD
9
1.563P STD
NEXT PAGE
When the setting item is flashing, the menu
screen cannot be cleared even when pressing the
SET UP button.
8. Turn the JOG dial to select "HIGH" and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<RECORD SETTING>
NO PPS
1
0.313P
2
1.563P STD
3
1.563P STD
4
1.563P STD
5
1.563P STD
6
1.563P STD
7
1.563P STD
8
1.563P STD
9
1.563P STD
NEXT PAGE
9. When the setting is complete, turn the SHUTTLE ring
counterclockwise.
• The cursor moves to the camera number on the left.
• When continuing with other camera number settings, turn
the JOG dial to move the cursor to the desired camera number
and repeat steps 4 ~ 8 to perform settings.
<RECORD SETTING>
NO PPS
1
>> 0.313P HIGH
2
1.563P STD
3
1.563P STD
4
1.563P STD
5
1.563P STD
6
1.563P STD
7
1.563P STD
8
1.563P STD
9
1.563P STD
NEXT PAGE
10. Turn the SHUTTLE ring counterclockwise or press the SET
UP button to return to the normal screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• QUICK GUIDE
ALARM CH
GRADE A-PPS A-GRADE
STD 1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
SHUTTLE<<:BACK
ALARM CH
GRADE A-PPS A-GRADE
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
SHUTTLE<<:BACK
ALARM CH
GRADE A-PPS A-GRADE
HIGH 1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
SHUTTLE<<:BACK
ALARM CH
GRADE A-PPS A-GRADE
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
1.563P STD
SHUTTLE<<:BACK
11. Press the REC/STOP button.
• The REC/STOP button turns on and recording starts.
12. To stop recording, press the REC/STOP button for more
than 1 second.
• Recording stops and the REC/STOP button turns off.
REC/STOP

■ Basic playback

This unit allows recorded video to be played back using
various methods. The basic playback described here is the
most common method for playback.
1. Press the PLAY button ( inside the front door) on the front of
the unit.
• Recorded contents of the HDD are played back.
• After turning the power on, the oldest recorded video is
played back first. Otherwise, playback resumes at the position
of the previous playback.
PAUSE/
STOP
SHUTTLE HOLD
When the "HDD REPEAT PLAY" setting in the
"HDD SETTINGS" is set to "OFF", playback is
stopped when reaching the end of the physical HDD
or recorded section. When the "HDD REPEAT PLAY"
setting is set to "ON", recorded video data is played
back repeatedly.
2-1. (To change HDD, archive/copy device, or Compact Flash
Card playback device )
• • •
• Select the device you wish to playback by using the PLAY
DEVICE button on the front of the unit.
Selection can still be made with the PLAY DE-
VICE button even if "ID4•ID5" has been set to
"ARCHIVE•COPY" and a peripheral recording de-
vice is not connected to ID4•ID5. Moreover, select-
ing "HDD" will cause it to skip.
• PLAY DEVICE indicators
MAIN : Plays data from MAIN, SUB and LPA.
ARCHIVE : Plays data from the peripheral record-
ing device connected to ID4 when "ID4•ID5" is set
to "ARCHIVE•COPY".
COPY : Plays data from the peripheral recording
device connected to ID5 when "ID4•ID5" is set to
"ARCHIVE•COPY".
CFC : Plays data from the Compact Flash Card.
2-2. Press the PLAY button.
• Plays from the playback device that has been selected.
REV. PLAY( ) PLAY( )
11