Using A Microphone For Sing Along - Casio Celviano AP-80R User Manual

Hide thumbs Also See for Celviano AP-80R:
Table of Contents

Advertisement

Using a Microphone for Sing Along

You can connect a microphone to the digital piano to sing along
with built-in tunes, or with playback of SMF data from a memory
card.
Using the Microphone Jack
You can connect a commercially available microphone to the digital
piano's microphone jack. Before connecting a microphone, set the
MIC VOLUME knob to a relatively low setting. Next, adjust the
volume to the desired level after connecting the microphone.
Set the MIC VOLUME knob to the "MIN" setting.
1
Use the microphone's switch to turn it on.
2
Use the MIC VOLUME knob to adjust the microphone
3
volume level.
MIC VOLUME Knob
Lower
Microphone on/off switch
IMPORTANT!
• You may get static noise in the microphone output if there is an
external device connected to the digital piano's MIDI terminal.
• Be sure to unplug the microphone from the digital piano when
you are not using it.
MAIN VOLUME
E-20
[Bottom]
Higher
MIC VOLUME
RHYTHM
ECHO
SING ALONG
<PLAY/STOP>
TRANSPOSE/KEY CONTROL
G Recommended Microphone Type
Dynamic microphone (standard plug)
G Feedback
Any of the following conditions can result in feedback, which
causes a howling sound to be produced through the speakers.
• Cupping the head of the microphone with your hands.
• Positioning the microphone to close to the speakers.
If howling occurs, hold the microphone by the barrel (not the
head) and move it away from the speakers.
G Noise
Fluorescent lighting near the microphone can cause noise. If
this happens, move the microphone away from the fluorescent
lighting causing the noise.
To sing along with playback
Getting Ready
• Adjust the MAIN VOLUME (page E-6), ACCOMP/SONG
VOLUME button (page E-13), and MIC VOLUME (page E-20)
to appropriate levels.
Find the tune you want in the Song Group List, and
1
note its number.
• See page A-4 for the Song Group List.
Press the SING ALONG button to enter the sing along
2
mode.
• This causes the SING ALONG button indicator lamp to
light.
Select the sing along source.
3
<Built-in Tune>
Press the SONG/USER button so its indicator lamp is lit.
This is the sing along song mode.
<Memory Card Tune>
Press the CARD button so its indicator lamp is lit. This is
the sing along card mode.
Rotate the dial to select the tune you want.
4
ACCOMP/SONG VOLUME
Dial
SONG/USER
429A-E-022A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents