Picture Control; Using Automatic Picture Settings - Samsung LN-T4061F Owner's Instructions Manual

Picture Control

Using Automatic Picture Settings

Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select "Mode".
setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements.
3.
"Color", or "Tint(G/R)", then press the ENTER button.
4.
Press the ENTER button.
Press the EXIT button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
the OSD will be adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
English - 23
TV Picture
Mode : Dynamic
Contrast
Brightness
Sharpness
Color
Tint G 50
Balck light
Move Enter
TV Picture
Mode : Dynamic
Dynamic
Standard
Contrast
Movie
Brightness
Sharpness
Color
Tint G 50
Balck light
Move Enter
TV Picture
Mode : Dynamic
Contrast
Brightness
Sharpness
Color
Tint G 50
Balck light
Move Enter
Contrast
Move Adjust
100
50
85
55
R 50
100
Return
100
50
85
55
R 50
10
Return
100
50
85
55
R 50
10
Return
50
Return