Download  Print this page

Mitsubishi Electric Apricot VS Owner's Handbook Manual Page 76

Hide thumbs

Advertisement

Delete User password
Use this to clear or remove the existing password, without replacing
it with a new one. You may be asked for confirmation or to enter the
old password.
Warning
Remember your passwords, But do not write them down on a piece of paper
and leave it in your desk drawer, or pin it on your wall !
Password prompt
The system can be set to 'ask' for the password on switch on or re-
boot. You may not wish to have a prompt for security reason, but the
user is still required to enter a password.
Administrator Password
This allows the setting of a supervisory password and to choose
whether a user can change their individual password. This
administrator password will be requested in order to enter the BIOS
SET-UP. If the user password is entered instead, there is only access
to the System Summary and (if enabled) access to setting the User
Password of System Security.
The procedure is generally the same as for the User Password, with
the addition of User Password changeable by User. Select either
Yes or No for this feature.
Start Options
Certain features can be set or enabled for system boot up.
Keyboard Numlock
If ON, the keyboard number lock is enabled when the system boots
and the right hand section of the keyboard is numbers only.
Keyboard speed
This sets the speed at which a pressed key will repeat.
T E C H N I C A L I N F O R M A T I O N
The default setting is ON.
The default setting is FAST.
C/7

Advertisement

Table of Contents

This manual is also suitable for:

Apricot ls

Comments to this Manuals

Symbols: 0
Latest comments: