S A F E T Y N O T I C E
This equipment complies with the relevant clauses of following European directives:
89/836/EEC and 73/23/EEC, and is able to bear the CE mark.
FCC Class A
Warning - this equipment has been tested and found to comply with the limits for a Class A computing
device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices,
terminals, printer, etc.) certified to comply with the Class A limits may be attached to this computer.
Operation of this equipment in a residential area may cause unacceptable interference to radio and television
reception requiring the operator to take whatever steps are necessary to correct the interference.
FCC Class B
Warning - this equipment has been certified to comply with the limits for a Class B computing device,
pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer input/output devices, terminals,
printer, etc.) certified to comply with the Class B limits may be attached to this computer. Operation with
non-certified peripherals is likely to result in interference with radio and TV reception.
Radio and television interference
The computer described in this manual generates and uses radio frequency energy for its operation. If it is not
installed and used properly, in strict accordance with the manual, it may cause interference with radio and
The computer has been tested and found to comply with the RF emission limits for an FCC Class B
computing device which is intended to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference will not occur in a particular
If this equipment does cause interference with radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Move the computer away from the receiver being interfered with.
Turn the computer with respect to the receiver.
Turn the receiver with respect to the computer.
Plug the computer into an outlet that is on a different branch circuit from the receiver.
Disconnect and remove any I/O cables that are not being used.
Unplug and remove any expansion cards that are not being used. Replace the relevant blanking
Make sure that the computer is plugged into a grounded outlet
If you need additional help, consult your supplier. You may find the following booklet helpful, How to
Identify and Resolve Radio-TV Interference Problems. This booklet is available from the US Government
Printing Office: Washington DC 20402 - Stock No. 004-000-000345-4.