Platform Setup
1. Remove the extra four-pin connector (shown connected to 20 pin connector in
Figure 27 on page
the main connector. This connector is NOT to be used. Intel recommends adding a
label to prevent use.
Figure 26.
Power Connector
Warning:
The four-pin connector tied to the main ATX connector is not to be used! The colors of
the wires in this connector are one yellow, one black, one red and one orange. These
are different voltages then used on the CRB and will DAMAGE the CRB if used.
Figure 27.
ATX Power Connector
January 2007
Order Number: 315879-002
35), if attached, by sliding it out of the groove that attaches it to
1
1
11
11
10
10
20
20
Dual-Core Intel® Xeon® Processor LV and Intel
1
2
1
2
3
3
4
4
B5790-01
®
3100 Chipset
User's Manual
35