Cleaning - Kenwood Choco Latte Deluxe Quick Manual

cleaning

G
Always switch off, unplug and
dismantle before cleaning.
G
Take care when handling the
base/paddle assembly as it may be
hot.
G
Never allow the underside of
the base/paddle assembly to
get wet.
G
Never let the power unit, cord or
plug get wet.
G
After use empty the goblet and rinse
thoroughly with clean water before
unscrewing the tap or base/paddle
assembly.
G
Always wash immediately after use.
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult. However, if food has
accidentally been left to dry on,
loosen it by filling the goblet with
1.25 litres of water and operate by
turning the heating timer to the 10
cup position.
G
Don't wash any part in the
dishwasher.
G
Regularly dismantle the tap and
clean the parts thoroughly.
base/paddle assembly
Never immerse in water or allow the
underside to get wet.
Remove the base/paddle assembly
from the goblet.
G
Wipe the upper surface and paddle
with a damp soapy cloth, then wipe
with a clean cloth and dry
thoroughly. Use the brush provided
to remove stubborn residue. Don't
use harsh abrasives.
power unit
G
Wipe with a damp cloth, then dry.
lid, goblet
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seals are
correctly positioned on the goblet
dismantling the tap
1 Unscrew the dispensing tap lever
2 Wash the components, then dry
thoroughly.
3 Re-assemble the tap.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
G
using your Choco Latte Deluxe
G
servicing or repairs
Contact the shop where you bought
your Choco Latte Deluxe.
4
.
.
.