Access Codes; Remote Lock; Installations; Connect A Compatible Headset - Nokia Mobile Phone User Manual

Access codes

Select Settings > Settings.
>
To define how your device uses the access codes and security
settings, select General
card and from the following:
● The PIN (UPIN) code, supplied with the SIM (USIM) card,
helps to protect the card against unauthorised use.
● The PIN2 (UPIN2) code, supplied with some SIM (USIM)
cards, is required to access certain services.
● PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with
the SIM (USIM) card. If you enter the PIN code incorrectly
three times in succession, you are asked for the PUK code.
If the codes are not supplied, contact your service provider.
● The security code helps to protect your phone against
unauthorised use. You can create and change the code,
and set the phone to request the code. Keep the code
secret and in a safe place separate from your phone. If you
forget the code and your phone is locked, your phone will
require service. Additional charges may apply, and all the
personal data in your device may be deleted. For more
information, contact a Nokia Care point or your device
dealer.
● The barring password is required when using the call
barring service to restrict calls to and from your phone
(network service).

Remote lock

You can lock your device from another device using a text
message. To enable your device to be locked remotely, and
16
Security Phone and SIM
> >
to define the lock message to be used, select
Settings Settings General
> >
SIM card Remote phone
>
the message, select OK. The message can be up to 20
characters long.
To lock your device, send the lock message as a text message
to your mobile phone number. To unlock your device later,
select Unlock, and enter the lock code.

Installations

Select Applications
>
You can find additional applications and download
applications into this folder.
Important: Only install and use applications and other
software from trusted sources, such as applications that are
Symbian Signed or have passed the Java Verified™ testing.

Connect a compatible headset

Do not connect products that create an output signal as this
may cause damage to the device. Do not connect any voltage
source to the Nokia AV Connector.
When connecting any external device or any headset, other
than those approved by Nokia for use with this device, to the
Nokia AV Connector, pay special attention to volume levels.
>
Security and Phone and
>
locking. When you have entered
> Installations.
© 2009 Nokia. All rights reserved.