How To Use; On-Off Switch; Handle Release Pedal; How To Empty - Hoover FloorMate Deluxe Owner's Manual

4. HoW to use

Handle release Pedal

4.1 Step on pedal (A) to
4.1
lower handle
operating position.
Handle does not lock
into a single position,
but "floats" to allow
convenient operation.
a

transPorting

4.3
4.4
B
4.3 To move your 4.4 The cleaner may
cleaner from room to also be lifted using the
room, put handle in carry handle (B) on
upright position, tilt front of cleaner.
cleaner back on rear
wheels and push
forward.

5. HoW to eMPtY

dirty Water tank

(left side when facing unit)
When to empty
An automatic suction shut-off is built into the dirty
water tank to prevent the tank from overflowing.
When the shut-off activates, the cleaner will not pick
up water or debris and the sound of the motor will
change. The dirty water tank is full and must be
emptied.
How to empty
5.1 To remove tank, press down on release button
(A) and pull tank straight out.
5.2 Release tabs (B & C) on each side of the dirty
water tank to unlock the top portion of the tank.
on/off sWitCH
4.2 Push switch (A)
4.2
to
once to turn cleaner
a
ON. Push switch again
to turn cleaner OFF.
Cord storage
4.5
C
4.5 Wrap the cord
clockwise around the
two cord handle hooks
(C). For convenient
storage, attach the plug
end to the cord.
WARNING
!
To reduce the risk of personal injury, unplug
before cleaning or servicing. Do not use
cleaner without tank in place.
5.1 5.2
a
B
8
!
C