During The Wash Cycle; On The Utensils - Siemens Dishwasher Operating Instructions Manual

aus
– Clean filter in the supply hose.
– Reconnect power supply.
– Turn on the tap.
– Switch on the appliance.
– Water is left in the appliance
at the end of the programme.
– ( : ) Waste water hose
is blocked or kinked.
Filters blocked.
– ( : ) Waste water pump blocked,
cover on the waste water pump
is not locked in position
(see Waste water pump).
– Filters blocked.
– The programme has not yet ended.
Wait until programme ends (digital
display indicates :
implement the "Reset" function.
Error code :
– Filters 1J are soiled or blocked.
Refill indicator for rinse aid @ is not lit.
– Refill indicator switched off.
– Adequate rinse aid available.

... during the wash cycle

Unusual foam formation.
– Handwash liquid in the rinse aid
dispenser.
Spilled rinse aid causes excessive
frothing, therefore please remove with
a cloth.
Appliance stops during the wash cycle.
– Power supply interrupted.
– Water supply interrupted.
Filling valves making striking noises
– Caused by the installation of the water
line and has no effect on the function
of the machine. Remedial action is not
possible.
18
Knocking/rattling noise during rinsing
– Spray arm is striking utensils.
– Utensils not arranged correctly.

... on the utensils

Food residue on the utensils.
– Utensils placed too closely together,
– Too little detergent.
– Rinse programme too weak.
– Spray arm rotation obstructed.
– Spray arm nozzles blocked.
– Filters blocked.
– Filters incorrectly inserted.
– Waste water pump blocked.
– Top basket on right and left not set to
Tea or lipstick residue is not completely
removed.
– The detergent has an inadequate
– Too low rinsing temperature.
– Too little/unsuitable detergent.
Dull, discoloured glasses, film cannot be
washed off.
) or
– Unsuitable detergent.
– Glasses not dishwasher-proof.
Streaks on glasses and cutlery, glasses
have metallic appearance.
– Too much rinse aid.
Plastic parts discoloured.
– Too little/unsuitable detergent.
– Too weak programme selected.
Utensils not dry.
– Appliance door opened too early and
– Programme selected without drying.
– Too little rinse aid.
utensils basket overfilled.
same height.
bleaching effect.
utensils taken out too early.