Download Print this page

Troubleshooting - Philips BDP7700 User Manual

Blu-ray disc/ dvd player
Hide thumbs

Advertisement

6 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. ______________________________
Main unit
The buttons on this player do not work.
Disconnect this player from the power
supply for a few minutes, and then
reconnect.
Picture
No picture.
Make sure that the TV is switched to the
correct source input for this player.
For the composite connection (via the
VIDEO connector) to the TV, on this player
select a video resolution of 480i/576i or
480p/576p to enable video output (press
, and select [Setup] > [Video] > [HDMI
video]) .
No picture on HDMI connection.
Make sure that the HDMI cable is not
faulty. If it is faulty, replace with a new
HDMI cable.
On the remote control, press
SUHVV ´µ QXPHULF EXWWRQV WR UHFRYHU
picture display. Or wait for 10 seconds for
auto recovery.
If this player is connected to an
unauthorized display device with an HDMI
cable, the audio and video signals may not
be output.
7KH GLVF GRHV QRW SOD\ KLJKGHÀQLWLRQ YLGHR
Make sure that the disc contains high-
GHÀQLWLRQ YLGHR
Make sure that the TV supports high-
GHÀQLWLRQ YLGHR
Sound
No audio output from the TV.
Make sure that the audio cables are
connected to the audio input of the TV.
Make sure that the TV is switched to the
correct source input for this player.
No audio output from the loudspeakers of
the external audio device (home theater or
DPSOLÀHU 
Make sure that the audio cables are
connected to the audio input of the audio
device.
Switch the external audio device to the
correct audio source input.
No 7.1 (or 5.1) channel audio from the
loudspeaker of the audio system.
According to multi-channel connection,
select correct sound output: press , and
select [Setup] > [Audio] > [Channels].
Make sure that the disc contains 7.1 (or
5.1) channel audio.
Make sure that the audio device supports
7.1 (or 5.1) channel audio.
Make sure that the audio format is
supported by the disc and the connected
DXGLR GHYLFH DPSOLÀHUUHFHLYHU 
)RU SOD\ RI YLGHR ÀOHV ZLWK '76 PXOWL
channel audio from USB or DLNA, only 2
channel audio can be heard from multi-
channel connection.
and then
EN
23

Advertisement

loading

  Also See for Philips BDP7700

  Related Manuals for Philips BDP7700