Operation; Recording, Timer Recording And Copying - Panasonic Diga DMR-BW780 Operating Instructions Manual

Troubleshooting guide

Operation

The remote control doesn't work.
The remote control and main unit are using different
codes. Change the code on the remote control. (
Software (firmware) is updating when "UPD / " is
displaying on the unit's display. Wait until the update is
completed. ( 84)
The HOLD function is activated. (
The unit is on but cannot be operated.
Drive has not been selected properly.
Cannot tune channels.
Cannot download channel presets from the
television.
Check the connections.
You must connect to a VIERA Link (HDAVI Control 3 or
later) compatible TV with a HDMI cable to download
channel presets. (
Startup is slow.
Startup takes time in the following situations:
– A disc is inserted.
– The clock is not set.
– Immediately after a power failure or the AC mains lead
is connected.
– When the unit is connected with an HDMI cable.
– When the BD-J (
90
VQT2J69
1 Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
2 Press and hold [OK] for more
than 5 seconds.
85)
12)
106) application is executing.
Recording, timer recording and
copying
Cannot record.
82)
Cannot copy.
Some broadcasts are copyright protected.
You can not record to the disc by pressing the [¥ REC] or
timer recording.
The disc is protected with DVD Management or Blu-ray
Disc Management. (
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there is
insufficient available capacity on the HDD.
Delete unnecessary titles on the HDD (
You cannot record and copy on finalised discs.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Recording or editing
may not be possible on these discs after ejecting and
loading the disc or turning the power on/off for
approximately 30 times after being recorded to.
Discs recorded on equipment other than this unit may not
be able to be recorded to.
This unit cannot record/copy NTSC signals to discs that
already have PAL signal recordings.
Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Cannot record from external equipment.
Check that the connection and input channel is correct.
( 13, 60)
Cannot record 2 programmes
simultaneously.
There are conditions that 2 programmes simultaneous
recording is possible. (
Timer recording does not work properly.
Refer to "Notes on timer recording" (
A part or whole of a recorded title has been
lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc
may become unusable.
We cannot offer any guarantee regarding lost
programmes or discs. (
72)
40)
25)
30)
72, 77)