Network - Panasonic Diga DMR-BW780 Operating Instructions Manual

Deep Colour Output
This setting for selecting whether to use Deep Colour
output when a television that supports Deep Colour is
connected.
HDMI Audio Output
Select "Off" when connected to TV with HDMI cable,
and connected to amplifiers not compatible with HDMI
with a DIGITAL AUDIO OUT terminal
7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is automatically
expanded and played back at 7.1 ch.
≥If "Off" is selected, sound is played over the original
number of channels. (Note that in the case of 6.1 ch
audio, playback will be at 5.1 ch)
Audio reformatting is enabled in the following cases:
– When you have selected "PCM" in "Digital Audio
Output".
– When the audio is Dolby Digital, Dolby Digital Plus,
Dolby TrueHD or LPCM.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
VIERA Link
Set to use "HDAVI Control" function when connected
with an HDMI cable to a device that supports "HDAVI
Control".
≥Select "Off" when you do not want to use "HDAVI
Control".
∫ Component Resolution
This sets the video output resolution when using the
component video terminal.
≥You cannot change the setting while the "HDMI Video
Mode" is set to "On".
Set the "HDMI Video Mode" to "Off".
≥If it is set to "720p", images other than "720p" will be output
as "1080i".
≥Even if you select "720p" or "1080i", the video output
resolution is restricted to "576p/480p" when HD contents
recorded on this unit, DVD-Video discs, DivX and BD-
Video discs recorded at a rate of 50 field per second and
images via AV1, AV2 or DV input are output from the
COMPONENT VIDEO OUT terminals.

Network

∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (
∫ Network Settings
IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
≥ "Connection Speed Setting" is enabled only when "Connection
Speed Auto-configure" is turned "Off".
Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
Internet Content Settings
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (
Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select "Off" when the audio is warped.
Home Network ( DLNA ) Settings
You will be able to access this unit from Panasonic
DLNA compatible equipment on the network by
registering them to this unit. (
It is also possible to change the name of this unit on the
network.
Server ( DLNA ) Settings
By allowing access from non-Panasonic DLNA
compatible equipment on the network, it allows them to
access this unit. ( 66)
19)
74)
66)
81
VQT2J69