Freezer Features; Automatic Ice Maker; Shelves; Drawers - Kenmore 596.62822200 Use & Care Manual

Kenmore bottom-freezer refrigerator
Hide thumbs Also See for 596.62822200:
Table of Contents

Advertisement

Available languages

Available languages

Freezer features

Automatic ice maker

(SOME MODELS)
CAUTION
To avoid property damage, observe
the following:
➢ Do not force ice maker arm down
or up.
➢ Do not place or store anything in
ice storage bin.
Using Ice Maker for the First Time
1. Confirm ice bin is in
place and ice maker
arm is down.
2. After freezer section reaches
between 0° to 2° F (-18° to -17° C),
ice maker fills with water and begins
operating.
3. Allow approximately 24 hours after
installation to receive first harvest of
ice.
4. Discard ice created within first 12
hours of operation to verify system is
flushed of impurities.
Operating Instructions
1. Confirm ice bin is in place and ice
maker arm is down.
2. After freezer section reaches 0° to 2°
F (-18° to -17° C), ice maker fills with
water and begins operating. You will
have a complete harvest of ice
approximately every 3 hours.
3. Stop ice production
by raising ice maker
arm until click is
heard.
4. Ice maker will remain in the off
position until arm is pushed down.

Shelves

ICE SERVICE RACK
To install and
remove rack:
➢ To install, slide
L-shaped
1
groove of shelf
2
down over back
wall screw. Push rack back until screw
is stopped in L-shaped groove (1) .
Slide front portion of shelf over front
wall screw (2).
➢ To remove, perform above steps in
reverse order.
FIXED FREEZER SHELF
To remove and install shelves:
➢ Remove shelf
by pulling out
to full
extension. Tilt
up front of
shelf and pull straight out.
➢ To install, insert shelf into refrigerator
liner rails and push to back of
compartment.

Drawers

WIRE BASKET
To remove and install basket:
➢ To remove
basket, pull
basket out
to full
extension.
Tilt up front of basket and pull straight
out.
➢ To install, insert basket into
refrigerator liner rails and push back
into place.
PULLOUT DRAWER
BASKETS
(SOME MODELS)
(Door assembly of drawer removed from
illustration for visual clarity.)
To remove baskets:
➢ Follow steps 1-3 of Pullout Drawer
(page 8).
To replace baskets:
➢ Follow steps 3-4 of Pullout Drawer
(page 9).
DANGER
To
prevent
accidental
child
entrapment or suffocation risk, DO
NOT remove the divider in the top
freezer basket.

Door storage

DOOR SHELF
The Door Shelf
provides convenient
storage for frozen
food items in freezer
door.
To remove and install
door shelf:
➢ To remove shelf, lift assembly from
side liner tabs and pull out.
➢ To install, fit ends of shelf assembly
on liner tabs and slide down.
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents