Spillsafe™ Glass Shelves; Slide Away Glass Shelf; Deodoriser; Bottle Twist Holder - Electrolux ETE5207 User Manual

Refrigerator
Table of Contents

Advertisement

UsInG YoUR appLIanCe
Spillsafe™ glass shelves
spillsafe™ glass shelves keep spills on the shelf. a shelf
retaining system minimises accidental movement of
shelves and they can be adjusted to various heights.
spillsafe™ glass shelves are not to be used as slide out
shelves. to remove the shelves, gently pull them forward
until the shelf comes clear of the shelf guides. to return the
shelf, make sure there is nothing behind that may obstruct
movement. Gently push the shelf into the cabinet and back
into position.
Slide away glass shelf (where fitted)
this shelf can be used either as a full depth shelf or when
tall items need to be stored at the front of the appliance it
can be collapsed to half its original depth.
Collapsing the shelf
1. pull the front half of the shelf forward.
2. then, from the underside, lift the front half of the shelf
by raising the rear edge over the recessed hook detail.
hook detail
3. pull the shelf forward and allow the rear to drop into
the side channels.
4. push the front shelf backwards (3,4) until it reaches the
rear stops.
15
• Repositioning the shelf
the shelf can be repositioned within the appliance unit
by pulling the whole assembly out until the side panels
are free to pivot down, then pivoting the rear of the
shelf until the shelf is free from the liner runners. the
shelf can then be positioned in any of the runners
this is a very useful feature if your appliance door
happens to have limited access.
Deodoriser (where fitted)
Your appliance is fitted with a deodoriser to assist with the
removal of food odours inside your appliance.
odours are removed by absorption through the filter by the
normal operation of the appliance. Keeping food covered
and wrapping food with plastic wrap will also help to
reduce the odours inside your appliance.
Bottle twist holder operation (where fitted)
the bottle twist holder is used to prevent bottles from
falling over. the bottle twist holder consists of two parts,
a sliding front, and a rotating retainer ring.
the bottle twist holder can be used in two positions:
• Horizontal
When the bottle twist holder ring is horizontal, any item
that fits within the ring can simply be placed inside it.
• Vertical
When the bottle twist holder ring is vertical, it is
possible to simply slide the bottle twist holder along
the bottle retainer bar until it is pushed up against
a bottle.
Note: The bottle should be constrained on the other side
by either the end of the bin or other adjacent bottles.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents