Powering On The Pedal - PageFlip Cicada User Manual

PageFlip Cicada User Guide

4.3 Powering On the Pedal

1. Slide the POWER switch to the On position.
2. The pedal will attempt to pair itself with a computer.
3. For all new pairings, please refer to the Pairing instructions in Sec. 4.4.
4. For existing pairings, an LED will blink quickly (every second) for up
to 30 seconds.
5. The LED will blink slowly (every four seconds) once a pairing is
re-established.
6. Make sure the paired computer is on and awake.
Figure 4: Top view of PageFlip Cicada control panel.
PageFlip, Inc.
4.3 Powering On the Pedal
10
www.pageflip.com