GE WattStation User Manual page 8

WattStation™ Wall Mount User Manual
Step 4: Remove the oval snap-fit ring to access the cover hardware. Take off front cover and the
deadfront shield by first carefully disconnecting the wires connecting the front cover.
Disconnect from Vehicle: WattStation can be disconnected from the vehicle at any time.
Press and hold the button on top of the connector handle and pull the handle away from the vehicle inlet
socket. The charge status indicator light will turn off.
Replace the connector handle into the WattStation holder by pushing the connector into the inlet. This will
ensure the connector is locked with the metal inlet of the WattStation holder.
Step 5: Remove the wire pigtail from the line side of field wiring block and discard.
8 GE Energy ©2012 GE Company All Rights Reserved