Motorola F5208 User Manual page 34

Mobile workstation
Hide thumbs Also See for F5208:
Table of Contents

Advertisement

1
Power Inlet
12V/24V power supply inlet from the vehicle battery system.
2
USB Ports
Three USB 2.0 ports.
USB ports 1 and 2 are for temporary connection of external
USB devices with up to 500mA load per port.
USB port 3 is normally used to connect the MW810 Mobile
Workstation keyboard. The port receptacle has two threaded
bosses for securing the USB connector.
NOTE: Be aware, USB devices connected to the USB port
should be compliant with the operating system. Otherwise
the system does not operate properly.
Keep the USB ports of the display unit sealed by using the
rubber plugs attached to the display.
3
CPU-to-Display Cable Receptacle
Signal cable 50 pin receptacle for connecting the display to
the CPU Box.
The cable connector is secured to the display by two screws.
4
Mounting Screw Holes
Four M4 threaded screw holes for securing the display to a
mount.
5
Bluetooth Antenna
Internal Bluetooth Module and Antenna (optional) for internal
V2.0 plus EDR (Enhanced Data Rate) Bluetooth module.
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motoa4 f5208Motoa4 mw810

Table of Contents