Add Ringing Tones For Contacts; Create Contact Groups - Nokia N73 User Manual

To restrict calls from your device to selected phone
numbers, select Options
your PIN2 code to activate and deactivate fixed dialing or
edit your fixed dialing contacts. Contact your service
provider if you do not have the code. To add new numbers
to the fixed dialing list, select
contact. You need the PIN2 code for these functions.
When you use Fixed
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient's phone number must be
included on the fixed dialing list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognizes it).
1
Press to open a contact card or go to the groups list,
and select a contact group.
2
Select Options
opens.
3
Select the ringing tone you want to use for the
individual contact or the selected group.
54
> Activ. fixed dialling. You need
Options > New SIM
dialling, packet data connections are
> Ringing tone. A list of ringing tones
Copyright © 2006 Nokia. All rights reserved.
To remove the ringing tone, select
list of ringing tones.

Create contact groups

1 In Contacts, press
2
Select Options > New
3
Write a name for the group or use the default name
Group N, and select OK.
4
Open the group, and select
5 Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select OK to add the contacts to the group.
To rename a group, select Options
new name, and select OK.
Remove members from a group
1
In the groups list, open the group you want to modify.
2
Scroll to the contact, and select
from group.
3 Select Yes to remove the contact from the group.
Default tone from the
to open the groups list.
group.
Options > Add members.
to mark it. To add
> Rename, enter the
Options > Remove