Control Panel Buttons - Brother HL-5240L User Manual

Control panel buttons

The control panel buttons have the following functions:
Cancel printing
If you press Job Cancel while printing, the printer will immediately stop printing and will then eject the
paper.
Wake-up
If the printer is in sleep mode, press Go or Job Cancel to wake the printer up and go to the Ready state.
Error recovery
If there is an error, the printer will recover automatically from some errors. If an error is not automatically
cleared, press Go to clear the error, and then continue to use the printer.
Form feed
If the yellow Status LED is on for a long time, press Go. The printer will print any remaining data in the
printer memory.
Reprint
To reprint the last document, press Go and hold it down for about 4 seconds until all the LEDs light up in
order (Toner, Drum, Paper, Status), and then release Go. Within 2 seconds press Go the number of
times you want to reprint. If you don't press Go within 2 seconds, a single copy will be printed.
4. Control Panel
51