Set Up Server Configuration - Digitus DN-13007 User Manual

9.2.2

Set up Server Configuration

To set up the server configuration, the system will request user to enter administrator
(default: admin) and password (default: admin) to login.
General Configuration
Set Host Information: You have to set some information for networking
using SMB protocol:
Comment: optionally set to describe the server
Host Name: the name to represent the server for Windows networking
using SMB protocol
Workgroup: the SMB workgroup name that the server belongs to.
File Server Codepage: if users want to communicate files using FTP
client tool or SMB on Windows 98 SE/Me/2000 with Digitus DN-13007 MFP
server, they have to set their MFP server codepage to be same as the
codepage that their Windows PC is using. Generally, the criteria of
choosing codepage are based on your Windows codepage. For example, if
your Windows codepage is Traditional Chinese, you have to select
Traditional Chinese (Big5) in server. Please refer to Chapter 6 File Server
Function.
USB Device Information: You can set printer names and display some
information of USB mass storages and scanners. Please refer to Chapter 4,
Chapter 6 and Chapter 7.
TCP/IP: You have to set the server's TCP/IP configuration to connect TCP/IP
network. Please see Chapter 3 Basic Installation for more details.
Supported Protocols: The server supports the following TCP/IP protocols:
TCP/IP
Enable LPR (Line Printer Remote) Printing: select or clear Enable LPR
Printing support. It is enabled in Factory Default.
Enable IPP Printing: select or clear Enable IPP Printing support. It is
enabled in Factory Default.
Enable Raw TCP Printing: select or clear Enable Raw TCP Printing
support. It is enabled in Factory Default and users may set the
protocol's TCP ports as following boxes:
-
-
Enable SMB/CIFS Print/File Server: select or clear Enable
SMB/CIFS Print/File Server support. It is enabled in Factory
Default.
-
TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
Enable Internet Access: select or clear Enable Internet Access
support. If you clear the item, you do not allow that users can
64