Table of Contents
Advertisement
Components
System
System Unit
System Information
System Name: The name of the system unit.
•
<System Name> may not be longer than 14 characters and must start with a
letter that can be followed by letters, digits, and hyphens ("-").
The system name is also used for DNS name resolution and as DHCP client
identifier and therefore has to be "unique".
System Location: The location of the system unit
•
System Contact: The contact information for this system unit.
•
Rack Name: The rack name of the system unit.
•
<Rack Name> may not be longer than 13 characters and must start with a
letter that can be followed by letters, digits, and hyphens ("-"). Note that the rack
name can also be empty.
Unique Rack ID: The unique rack ID of the system unit.
•
Automatic Inventory Retrieval: If set to AUTOMATIC, inventory retrieval is
•
performed automatically for the server blades which are inserted or when the
system unit is powered on. If set to MANUAL, automatic inventory retrieval is
not performed.
Update All Connection Blade Names On Changing System Name or Rack
•
Name: When this function is enabled, the names of all connection blades are
updated in accordance with the following syntax:
<Rack Name>–<System Name>–CB<Slot Number>
This only affects the types "GbE Connection Blade-x" and "10GbE Connection
Blade-x". Other types of connection blade are not affected by this function.
Fan Control
Here the status of all fans in the system unit is displayed.
•
All Fans Have Failed
Enables the user to configure the reaction after all fans have failed or are
•
unavailable.
Fan Test
Daily test time: Sets the fan test time for the system fan. The format should be
•
HH:MM.
Test at every startup: Sets the fan behavior when the system powers on. If this
•
Refers to more detailed information in the help text which is
marked there with
.
Components
7
Advertisement
Table of Contents
