Table of Contents
Advertisement
was synchronized with the NTP Server.
Refresh Settings
Automatic Refresh
Enable Automatic Refresh: Enables/disables the automatic refresh function.
•
Refresh Cycle (1 - 15): Sets the refresh interval for automatic refresh in minutes.
•
The valid value is 1 to 15.
Language
The user can set the language of the Web Interface and/or of the Local Service Display.
Base Configuration Wizard
The Base Configuration Wizard facilitates system startup. The wizard appears when the
user first signs into the WebUI and is displayed until the first time it has been
completed successfully.
Language Selection: The user can set the language of the Web Interface and of
•
the Local Service Display.
Date/Time Settings: Setting date and time for the MMB. The format is
•
(MM/DD/YYYY) and (HH:MM:SS).
Import Settings: Enables the system unit settings to be imported from a USB
•
memory stick or from a local file to the system unit.
Identification Settings: The Identification menu provides input boxes to define
•
the rack name, system name, system contact, system location.
Caution: The system name may not be longer than 14 characters.
Network Settings
•
IPv4: Allows to enable the management LAN IP setting "For
o
Component Groups" or "For Individual Components".
If you enable the address setting "For individual Components", you
have to set the IP addresses in the configuration page for each
component. The Base Configuration Wizard supports enabling the
address setting "For Component Groups" only.
You can also decide whether an external DHCP server provides the IP
settings or if the MMB provides static IP settings in slot based order, and
you can enter two DNS addresses.
IPv6: For the management LAN, the IPv6 menu allows to enable IPv6
o
Settings
35
Advertisement
Table of Contents
