Table of Contents
Advertisement
When using PPTP, enter the following information in the fields (some information are provided by your
ISP):
IP Address: Type the IP address which your ISP provides.
Subnet Mask: Type the Subnet Mask which your ISP provides.
Gateway: Type the IP address of Gateway which your ISP provides.
Server IP: Type the IP address of server which offers Internet service. Your ISP will provide you with this
information.
PPTP Account: Type your PPTP account.
PPTP Password: Type your PPTP password.
PPTP Retype password: Confirm your PPTP password again.
Maximum Idle Time: Specify the time that will elapse before the WRT-410 times out of a connection.
Auto-reconnect: If this function is enabled, WRT-410 will try to rebuild Internet connection once the link
is down.
3.1.3 Password
You can change the Administrator and User's password in this screen. These passwords are used to gain
access to the router interface. When you login with user name "User", you don't have permission to
configure WRT-410.
- 8 -
Advertisement
Table of Contents
