Samsung HG32EA790** Installation Manual page 27

y Plug & Play OSD
– Initial Highlight: Interactive
– If Standalone Only button is selected, the Standalone hotel mode is set by default and "Standalone mode is set" OSD is
displayed for 3 seconds.
– TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for 3 seconds.
– When Interactive mode is selected, Interactive Setup Menu is displayed. Press power off button to exit from Interactive
menu.
– When Standalone Plug & Play mode is selected, "Select Menu Language" OSD is displayed.
y Select Menu Language OSD
– When Standalone Plug & Play is selected from "Easy Set Up" OSD, "Select Menu Language" OSD is displayed.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If ENTER button is pressed, "Select Area" OSD is displayed.
y Select Country
– Initial Highlight: United Kingdom.
– The Country OSD is displayed and the area can be selected.
y Clock setting OSD
– Display time: 30 seconds.
– The Clock Set item OSD is displayed
– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.
y Auto Search Mode OSD
– If skip option is selected, it goes to Clock setting OSD.
– If ENTER button is pressed, auto searching of channels is performed.
– The OSD Display time, which is from the time that Auto Store is started to the time that Auto Sort is completed, is 30
seconds.
y Picture Mode OSD
– Initial Highlight: Standard.
– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
– After selecting the picture mode, it enters Standalone Setup Menu OSD, press power off to exit.
[Hotel-XC]BN68-04282R-00Eng.indd 27
27
English
2012-03-29 오후 3:03:24