Connecting The Rjp (Remote Jack Pack) - Samsung HG32EA790** Installation Manual

Output of any external source connected to RJP on hotel desk.
USB
RJP Rear
1. Connect the PC IN / PC/DVI AUDIO IN
2. Connect the AV IN [VIDEO]/[L-AUDIO-R]
3. Connect the AV IN [VIDEO]
4. Connect the HDMI IN
5. Connect the port of the TV and the RS/232 port of the RJP.
RJP
✎
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎
You can select
[Hotel-XC]BN68-04282R-00Eng.indd 17

Connecting the RJP (Remote Jack Pack)

4 HDMI cable
HDMI VIDEO AUDIO AUDIO/PC
5
2 Audio Cable
3 Video Cable
port of the TV to the PC/AUDIO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV to the VIDEO port of the RJP.
(1(DVI), 2 or 3) port of the TV and the HDMI port of the RJP.
HDMI IN (1(DVI), 2 or 3) and AV IN
TV Rear Panel
1 D-sub / PC Audio cable
for connecting RJP.
17
English
2012-03-29 오후 3:03:22