Integration Calculations - Canon F-789SGA User Instructions

Error Message
Math ERROR
Stack ERROR
Syntax ERROR
Insufficient
MEM
Dimension
ERROR
(only in Matrix
or Vector)
Can't Solve
ERROR
(only in SOLVE
function)
Variable
ERROR
(only in SOLVE
function)
Time Out
ERROR
(only in
Differential or
integration
Calculations
Argument
ERROR
Cause
• The intermediate or final
result is outside the
allowable calculation range.
• An attempt to perform a
calculation using a value
that exceeds the allowable
input range.
• An attempt to perform an
illogical operation (division
by zero, etc.)
• The capacity of the numeric
stack or operator stack is
exceeded.
• An attempt to perform an
illegal mathematical
operation.
• The calculation result of
Function Table mode
parameters caused more
than 30 x-values to be
generated for a table
• The dimension (row colum)
is over.
• An attempt to perform an
illegal matrix/vector
operation.
• The calculator could not
obtain a solution.
• Equation is not a correct
equation.
• Equation does not include
variable X.
• The solution variable is not
similar to the specified
variable in the expression.
• The calculation ends
without the ending condition
being fulfilled.
• Improper use of an
argument.
• Check the input values and
make sure they are all
within the allowable
ranges, Pay special
attention to values in any
using memory areas
• Simplify the calculation.
• Divide the calculation into
two or more separate
parts.
• Press
the cursor at the location
of the error, make
appropriate corrections
• Narrow the table
calculation range by
changing the start, end,
and step values, and try
again.
• Press
the location of the cause of
an error and make
required corrections.
• Check for errors in the
equation that you input.
• Input a value for the
solution variable that is
close to the expected
solution and try again.
• Correct the equation to
include variable X.
• Correct the equation to
match the solution variable
and expression.
(refer to P.49)
• Revise the ending condition
and try again.
(refer P.51)
• Press
the location of the cause of
an error and make required
corrections.
16
Action
or to display
or to display
or to display