Resetting To Factory Defaults - Silvercrest SCAA 5.00 A1 User Manual And Service Information

Resetting to factory defaults

In this menu you can restore the factory-default settings of your camcorder. Proceed as
follows:

Press the On/Off/Mode button [2] multiple times to select the MORE menu and then
press the record button [9] to confirm.

Press the On/Off/Mode button [2] multiple times until the DEFAULT menu is highlighted.
Press the record button [9] to open the DEFAULT menu.

You'll have to confirm the factory reset. If you want, you can also cancel this process.
Press the On/Off/Mode button [2] to select an option. The following options are
available:

Press the record button [9] to confirm your selection.

To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
Confirm (reset to factory defaults)
Cancel (EXIT)
SilverCrest SCAA 5.00 A1
English - 45