Table of Contents
Advertisement
T50_setup.fm Page 2 Thursday, August 9, 2001 11:09 AM
Setup
Hardware Requirements
Handling Instructions
Do not support the monitor
within the screen area. The
Liquid Crystal Display is
glass and can be damaged
by rough handling or
excessive pressure.
Workplace Preparation
This section gives advice
on what you should
consider before you set up your
monitor.
2
This monitor requires a computer with a suitable on-board sub-system or
Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or
VGA 640 x 480 at 60 Hz.
1.
Lift the monitor by placing your hands where indicated below.
2.
Before using your monitor for the first time, remove the clear protective
film from the front of the screen.
Height
The monitor should be positioned so that the top of the screen is slightly
below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. The monitor should be positioned
directly in front of you so that you do not have to twist your body to use it. Tilt
the monitor to a comfortable viewing angle.
Advertisement
Table of Contents
