Appendix A. Product Specifications - IBM 73P3309 User Manual

Appendix A. Product specifications

This appendix includes the following information:
v Physical specifications
v Power requirements
v Environmental requirements
v Read speeds
v Write speeds
Physical specifications
The physical specifications
Physical specification
Height
Width
Length
Weight
Power requirements
The following table lists the power specifications by voltage level for the drive. The power specifications
are measured at the drive power connector and are nominal values.
Power specifications
At voltage
At voltage
Environmental requirements
Specification
Temperature
Relative humidity (noncondensing)
Read speeds
Media
DVD-ROM (single layer)
DVD-ROM (dual layer)
DVD-R (4.7 GB)
DVD+R (4.7 GB)
1. Product-description data represents IBM's design objectives and is provided for comparative purposes; actual results might vary
based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.
© Copyright IBM Corp. 2004
1
of the drive are listed in the following table.
Voltage
5V dc
12V dc
Operational
+5° C to +45° C
(+41° F to +113° F)
15% to 85%
42 mm (1.7 in.)
148 mm (5.8 in.)
190 mm (7.5 in.)
920 g (2.0 lb.)
Average
900 mA
600 mA
Nonoperational
-30° C to +60° C
(-22° F to 140° F)
10% to 90%
Read Speed
6.9 - 16.6 MB/s (12X CAV)
4.6 - 11.0 MB/s (8X CAV)
4.6 - 11.0 MB/s (8X CAV)
4.6 - 11.0 MB/s (8X CAV)
Maximum
1.3 A
1.8 A
A-1