Download Print this page

Wireless Headset; Wideband Headset; Autoanswer With Headset Or Speakerphone - Cisco 7941G User Manual

Handset, headset, and speakerphone for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7941G:

Advertisement

Handset, Headset, and Speakerphone
Step 5
Press Save or press Cancel.

Wireless Headset

Cisco Unified IP Phones 7962G and 7942G support wireless headsets. Refer to the wireless headset
documentation for information about using the wireless headset's remote features. Also, check with your
system administrator to be sure your phone is enabled to use a wireless headset with the wireless headset
remote hookswitch control feature.

Wideband Headset

If you use a headset that supports wideband, you may experience improved audio sensitivity if you enable
the wideband setting on your phone (this setting is disabled by default). To access the setting, choose
> User Preferences > Audio Preferences > Wideband Headset.
If the Wideband Headset setting is dimmed, then you cannot control this setting.
Check with your system administrator to be sure your phone system is configured to use wideband. If the
system is not configured for wideband, you may not detect any additional audio sensitivity even when using
a wideband headset. To learn more about your headset, refer to the headset documentation or contact your
system administrator for assistance.
Speakerphone
If the handset is in its cradle and
call will trigger speakerphone mode automatically.
If you want to...
Toggle speakerphone mode on or off
Switch to a handset
Adjust the volume level for a call

AutoAnswer with Headset or Speakerphone

When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your
system administrator configures AutoAnswer to use either the speakerphone or a headset. You may use
AutoAnswer if you receive a high volume of incoming calls.
is not lit, many of the actions you can take to dial a number or answer a
Then...
Press
Lift the handset.
Press
Press Save to preserve the volume level for future calls.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
.
during a call or after invoking a dial tone.
Communications Manager 9.0 (SCCP and SIP)
Wireless Headset
3

Advertisement

loading

This manual is also suitable for:

7941g-ge79427961g7961g-ge7962