Panasonic Lumix DMC-FZ72 Operating Instructions Manual page 216

Operating instructions for advanced features
Hide thumbs Also See for Lumix DMC-FZ72:
Table of Contents

Advertisement

Others
Flash
No flash emitted.
Is the flash closed?
The flash becomes unavailable in the following cases:
• [Auto Bracket]
• [Burst] (Excluding [
• Scene Modes ([Scenery], [Night Scenery], [Handheld Night Shot], [HDR], [Sunset], [Starry Sky],
[Glass Through], [3D Photo Mode])
• [Creative Control] Mode
• [Panorama Shot] Mode
Multiple flashes are emitted.
Red-eye reduction is active (→79). (Flashes twice to prevent eyes appearing red.)
[Burst] is set to [
Playback
Pictures have been rotated.
[Rotate Disp.]
(→72)
Cannot view pictures. There are no recorded pictures.
No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if
not).
Is this a folder or picture which was processed in the PC? If so, it cannot be played back on the
camera.
During [Filtering Play], only pictures under the set filters are displayed.
→ Cancel filtering (→165).
Folder/file number displayed as [-]. Picture is black.
Is this a non-standard picture, a picture which has been edited using a PC or a picture which was
taken by another device?
Battery removed immediately after picture taken, or picture taken with low battery.
→ Save needed data on a computer or other device, and then use [Format] on the camera.
Picture display takes a lot of time during Multi Playback.
When you have many pictures that were edited with [Resize], [Retouch], etc., it may take several
minutes for all pictures to be displayed during Multi Playback.
Incorrect date displayed in Calendar Search.
Picture edited on computer or taken on different device.
[Clock Set] is incorrect (→27).
(Incorrect date may be displayed in Calendar Search on pictures copied to a computer and then
back to this unit, if computer and camera dates differ.)
White round spots like soap bubbles appear on the recorded picture.
If you take a picture with the flash in a dark place or indoors, white round spots may
appear on the picture caused by the flash reflecting particles of dust in the air. This is
not a fault. A characteristic of this is that the number of round spots and their position
differ in every picture.
(→78)
] ([Flash Burst]))
] ([Flash Burst]).
is set to [
] or [
].
- 216 -
Q&A Troubleshooting
(→73)
VQT5B87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents