3. Use the keypad to enter the additional numbers that will be
dialed automatically after the second pause.
Tip: You can create pauses longer than three seconds by entering
multiple 3 second pauses.
Inserting a Wait into your dialing sequence means that the phone
waits until it hears a dial tone before proceeding with the next
sequence of numbers.
Wait sends the next set of numbers only after tapping Yes. This is
indicated in the number string as a semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this will
continue to prompt you after each sequence.
1. From the Home screen, tap
keypad to enter the phone number.
phone to require your acceptance before sending the next set
of entered digits.
4. Once prompted to Send the following tones?, tap Yes to dial the
and then tap Add wait. This feature causes the
Call Functions and Contacts List
and use the on-screen