To activate Motion:
1. From the main Settings page, tap My device tab
2. In a single motion touch and slide the Motion slider to the right
to turn it on.
3. Read the on-screen notification and tap OK.
Note: At least one feature must be activated before Motion can be
4. In a single motion, slide a feature's activation slider to the on
The following is a description some of the most commonly
used motion gestures:
Direct call: once enabled, the device will dial the currently displayed on-
screen Contact entry as soon as you place the device to your ear.
Smart alert: once enabled, pickup the device to be alerted and notified of
you have missed any calls or messages.
Zoom: once enabled, you must be on a screen where content can be
zoomed. In a single motion, touch and hold two points on the display then
tilt the device back and forth to zoom in or out.
Move an icon: once enabled, to move an icon to another page.
Browse an image: once enabled, touch and hold a desired on-screen
image to pan around it. Move the device left or right to pan vertically or up
and down to pan horizontally around the large on-screen image.