To activate your connection:
1. From the main Settings page, tap Connections tab.
2. In a single motion touch and slide the Wi-Fi slider to the right to
turn it on. The slider color indicates the activation status.
3. Tap Wi-Fi Direct.
4. Tap Scan and select the single device name to begin the
connection process to another Wi-Fi Direct compatible device.
– or –
Tap Multi connect
begin the connection process to these Wi-Fi Direct compatible
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
5. Tap Done. The direct connection is then established. Confirm
appears in the Status bar.
6. When prompted to complete the connection, the recipient
should tap OK. Your status field now reads "Connected" and
your connected device is listed within the Wi-Fi Direct devices
Scan and select all the device names to
Changing Your Settings