• Settings: the following settings are available:
Storage: allows you to choose where your recordings will be saved.
Select between Device or memory card.
Recording quality: allows you to set the recording quality to High or
Limit for multimedia messages: allows you to select On or Off. If you
Limit for MMS by selecting On, you will be assured that the recording can
be sent in a message.
Contextual filename: (requires GPS tagging) allows you to adjust the
filename based on contextual information such as your current GPS
Default name: allows you to choose the name prefix for your recordings.
For example, if your Default name is Voice, your recordings would be
named Voice 001, Voice 002, Voice 003, etc.
Noise reduction: allows you to activate/deactivate background noise
Recording volume: allows you to assign the ambient noise quality of
your current location so the device can better detect audio. Choose from
High or Low.
Channel: allows you to assign recording mode to either Mono or Stereo.
Skip interval: allows you to assign a skip length.
• End: allows you to exit the application.