Note: If the Touch to beam screen does not appear on the source
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
8. From the Touch to beam screen, tap the reduced image
preview to begin the transfer. After a few seconds (depending
on file size) the recipient with then see the transferred file
displayed on their screen.
To share multiple pictures via S Beam:
1. On the source device (containing the desired image or video),
2. Locate the selected folder.
3. Touch and hold the first image and place a check mark on it
and all desired images.
4. Place the two active NFC-enabled devices back to back to
5. From the Touch to beam screen, tap the reduced image
preview to begin the transfer.
6. When prompted, separate the two devices.