How To Use The Reversible Inlet Grille - LG R-8000A Service Manual

3.5 HOW TO USE THE REVERSIBLE
INLET GRILLE
1. If you want to pull out the filter upward, open the
inlet grille slightly. Turn inside out the front grille.
Disassemble the inlet grille from the front grille with
separating the hinged part by inserting a "—" type
screw-driver tip.
Rotate the inlet grille 180 degrees and insert the
hooks into the lower holes of front grille.
Then, insert the filter. (See Figure 32, 33)
2. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Figue 34)
3. Lift the inlet grille and secure it with a type A screw
through the front grille.
(See Figure 35)
4. If you want to pull out the filter downward, use the
reversible inlet grille without change.
(The grille is already assembled for that way.)
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 17 -
Figure 32
Inlet Grille
Figure 33
Figure 34
Figure 35
LGE Internal Use Only