Turning The Power On; And Time - Sony Handycam FDR-AX100 Operating Manual

Turning the power on

1
Open the LCD monitor of your camcorder and turn
the power on.
• You can also turn on the camcorder by pulling out the viewfinder.
2
Following the instructions on the LCD monitor, select
the language, the geographical area, Daylight
Savings or Summer Time, date format, and the date

and time.

• To go to the next page, touch [Next].
• To turn off the power, close the LCD monitor. If the viewfinder is pulled
out, retract it.
• To set the date and time again, select
Settings]  [Date & Time Setting].
• To turn off the operating sound, select
General Settings]  [Beep]  [Off].
[
GB
18
Touch the button on the LCD monitor.
 [Setup]  [
 [Setup] 
Clock