Electrolux EVE611SA User Manual page 40

40 EVEP613SA, EVEP615SA, EVEP616BA, EVEP618BA
USING THE APPLIANCE
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking
temperature.
3. Set the required cook time.
4. Touch the 'delay end' symbol
5. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed. The oven will start its cooking cycle to
finish at the set 'end time'.
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in 'cook
time' mode.
7. Touch the 'delay end'
forward.
8. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed.
The oven will commence its cooking cycle to finish at the
set 'end time'
ImPorTAnT!
• 30 seconds after a cooking function has started, it is
no longer possible to delay the end time.
• In order to delay a cooking function that has already
started, the oven needs to be switched off then
switched on again and re-programmed.
• Even though the heating element turns off the oven
will still retain substantial heat. This will continue to
cook the food until it is removed or the oven cools
down. If you do not plan on being present when the
oven turns off, you should take this extra heating
time into account.
to move the end time.
symbol to move the end time
Timers
The appliance has two timers which can be used one at a
time. The count up timer can be used to measure a period
of time. The count down timer beeps at the end of a
preset time.
Setting the count up timer
The timer can be used independently of the oven for
measuring a count up period. There is no alert provided
with this timer.
1. Touch either 'timer'
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. To begin the count up timer press OK.
4. To reset the count up timer, press 'timer'
show 00min. Press OK to restart.
5. To cancel the count up timer press 'timer'
Setting the count down timer
The timer can be used independently of the oven for
setting a count down period. When the period of time has
elapsed, an audible signal sounds.
1. Touch either 'timer'
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. Touch the 'timer' to set the countdown period.
4. The timer bell icon
5. To begin the count down timer press OK or wait 8
seconds. When the timer starts, the bell will stop
flashing and the timer will begin to count down.
6. When the set time has elapsed, an audible signal will
sound for 2 minutes. The time indication '00min' and
the timer bell will flash on the display.
7. To stop the signal, touch either of the 'timer'
symbols .
8. To cancel the count down timer touch 'timer'
or
once to
twice.
or .
will flash.
or
twice.