Samsung RF28HM Series User Manual page 13

RE-ASSEMBLING THE FLEX
DOOR
To reattach the flex doors, assemble parts in
reverse order.
CAUTION
Be sure to connect the Flex Door Wire Connector.
If it is not connected, the Flex Room does not
work.
DISASSEMBLING THE
FREEZER DOOR
1. Take out the upper drawer by lifting it up.
2. Remove the freeze room guard ( 1 ) by lifting
the guard up.
3. Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
DA68-02952A-01.indb 13 DA68-02952A-01.indb 13
1
2
English - 13
CAUTION
You can scratch the side of the bin if you twist it
left or right when disassembling or re-assembling
it.
4. Press the fixing hook of the rail system.
5. Holding the top of the Freezer Drawer, pull it
out all the way, and then remove it from the rail
system.
CAUTION
Be careful not to scratch or dent the sliding rail by
letting it strike the fl oor.
CAUTION
Make sure that you mount the freezer basket in
the right position when removing / installing the
freezer door. Failing to do so may result in the
door not opening or closing properly.
CAUTION
Putting too much food into the freezer drawers
can prevent the freezer from closing completely
and can cause frost build-up.
2013. 12. 3. 2013. 12. 3. 8:50 8:50