Viking 3 Series Installation Manual
Built-in dishwashers
Hide thumbs
Also See for 3 Series:
- Use & care manual (32 pages) ,
- Use and care manual (28 pages) ,
- User's installation manual (20 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Viking 3 Series
Summary of Contents for Viking 3 Series
-
Page 1: Installation Guide
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit our web site in the US at www.vikingrange.com or in Canada at www.brigade.ca 1 & 3 Series Built-In Dishwashers F21043A EN (101513) -
Page 2: Table Of Contents
Table of Contents IMPORTANT — Please Read and Follow • Please read this installation manual and • Be sure to observe all listed warnings and Important Safety Instructions __________________________________________________________3 particularly the safety instructions cautions. Look particularly for the icons Inspect the Dishwasher ___________________________________________________________5 completely and carefully. - Page 3 IMPORTANT— IMPORTANT — Please Read and Follow Please Read and Follow In addition to these instructions, the • DO NOT use any extension cord or NOTICE WARNING dishwasher shall be installed: portable outlet device to connect the • In accordance with all local codes or, in dishwasher to a power supply.
-
Page 4: Tools Which May Be Needed
IMPORTANT— General Information Please Read and Follow • Inspect the Dishwasher: After unpacking To contact us, you may either call our toll- Tools Which May Be Needed the dishwasher and prior to installation, free number at 1-888-845-4641 or contact us thoroughly inspect the dishwasher for via the website in the US possible freight or cosmetic damage. -
Page 5: Materials Which May Be Needed
General Information General Information Parts Supplied Materials Which May Be Needed Parts for your dishwasher will come in several plastic bags. Check your parts bags to make sure you have all the parts as listed below. Hot Water Supply Line – Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line. -
Page 6: Enclosure Preparation
Specifications Enclosure Preparation Electrical Preparation WARNING The dishwasher is designed for an electrical supply of 120V, 60Hz, AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes. Preparation for Installing Mounting Brackets WARNING Dishwasher must be secured to adjacent cabinetry using the mounting... -
Page 7: Installing The Side Trim Strips
Enclosure Preparation Installation Preparation • Adjust the front foot level with the Preparing the Water Connection (A) adjusting wrench to balance and raise the dishwasher to the enclosure height. • Adjust the rear foot level with a • Install an easily accessible shut-off valve •... -
Page 8: Drain Preparation
Installation Preparation Installation Preparation Drain Preparation Steam Protection Foil The dishwasher drain hose may be connected to the drain plumbing in one of three ways, Steam will form inside the dishwasher during operation. At the end of the cycle, when the (Figures A, B, C): dishwasher door is opened, it is required to use a steam protection foil to prevent any steam from collecting on the underside of the counter top. -
Page 9: Drain Hose Connection, Water Supply & Electrical Connections
Installation Installation Placement of Dishwasher into the Opening Preparation of Water Supply Now place the dishwasher into the opening and get ready to connect all hoses and electrical connections. CAUTION Make sure all hoses are pulled through the side opening of the cabinet, no hoses are kinked, and all slack is taken out as shown in the figure to the left. - Page 10 Installation Installation Water supply may be connected to the • After installing one clip for each dishwasher in one of two ways: side, push the dishwasher into the • With metal braided hose. cabinet (Figure E). • With copper tubing. CAUTION •...
-
Page 11: Electrical Connection
Installation Installation Electrical Connection Grounding Instructions Readjusting Leveling Legs This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical Now that the dishwasher is in the cabinet, WARNING shock by providing a path of least resistance you must readjust the leveling legs to bring for electrical current. -
Page 12: Installing A Custom Panel
Installation Installation If the enclosure height is below 33-1/16” Installing a Custom Panel (84.0cm), use only (o) labeled kickplate (kickplate without slots). Installation should be done following the steps illustrated in the Figures A, B, and C respectively. Measure the height and width of the 1. - Page 13 Installation Installation 3. Mark the wooden door as shown in the 5. Attach the two mounting brackets to the drawing (Figure C). wooden door with 4 screws (Ø 1/8”x5/8” Ø " (3,5mm) (Ø 3.55mmx14mm) (Figure A). Min: 12.1 lb (5.5 kg) Max: 15.4 lb 6.
- Page 14 Installation Installation 8. Using the four screws Ø 3/16”x1-11/16” 11. Check whether (Ø 4mmx43mm) provided, attach the the bottom of wooden door to the dishwasher at the door hits the position 1 and 4 (Figure A). kickplate of the kitchen cabinet Ø...
-
Page 15: Final Instructions
Installation Installer Checklist and Final Instructions NOTICE Your installer must have completed and Self-Help Hints checked the following: The screen does not come on: If you have a European kitchen or want to install a wooden kickplate to match your kitchen, KThe dishwasher is square and level. -
Page 16: Service & Registration
All servicing should be referred to a qualified technician. ________________________________________________________________________________________________________________________________________________________ Contact Viking Range, LLC, 1-888-845-4641, for the nearest service parts distributor in your ________________________________________________________________________________________________________________________________________________________ area or write to:...