Samsung Galaxy S III User Manual page 233

Mobile phone
Hide thumbs Also See for Galaxy S III:
Table of Contents

Advertisement

Activating Visibility
1. From the main Settings page, tap Connections tab
Bluetooth.
2. Verify your Bluetooth is active.
3. From the top of the Bluetooth settings page, toggle the
state of the visibility check mark. Activating this feature
enabled your device visible allows other devices to pair
and communicate.
Note: Your device visibility is based on the time set within the
Visible time-out field (2 Minutes, 5 Minutes, 1 Hour, or
Never timeout). Press
This value appears as a countdown within this Visibility
timeout field.
(Menu)
Visibility timeout.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so
you can pair with them.
1. From the main Settings page, tap Connections tab
Bluetooth.
2. From the bottom of the Bluetooth settings page, tap
Scan to search for visible external Bluetooth-
compatible devices such as headsets, devices,
printers, and computers.
Important! Some Bluetooth devices are secured and require a
PIN number to confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required,
and tap OK.
Review Received Files
1. From the main Settings page, tap Connections tab
Bluetooth.
2. Verify Bluetooth is active.
3. From the Bluetooth settings page, press
tap Received files.
and then
Changing Your Settings
226

Advertisement

Table of Contents
loading

Table of Contents