Download  Print this page

Husqvarna H346SL Owner's Manual page 6

46 inch mower grass catcher
Hide thumbs

Advertisement

3
CONTAINER MOUNTING (See Fig. 3)
1. Install one container to left side fi rst. Install another
container to center position and one in right position.
NOTE: Left edge of right con tain er should always over lap
right edge of left con tain er at center supports.
2. Close cover and lock latches over center support
tubes. To lock and release latches, pull back on latch
handles.
COVER LATCH
HANDLES
CENTER
SUPPORT
TUBES
CONTAINER
HANDLE
DEFLECTOR SHIELD
REAR LATCH
FIG. 3
4
LOWER CHUTE - MOWER WITH
MOUNTING TAB (See Fig. 4)
1. Raise and hold defl ector shield in upright position.
2. Place slot in lower chute over mounting tab on mower
and position lower chute over mower opening as
shown.
3. Hook rear latch into fl ange hole on back of mower.
4. Hook front latch into fl ange hole on front of mower.
CAUTION: Do not remove defl ector shield
from mower. Raise and hold shield when
attaching lower chute and allow it to rest
on chute while in operation.
FIG. 4
6
DEFLECTOR SHIELD
HINGE BRACKET
MOUNTING
TAB
FRONT LATCH

Advertisement

loading

  Also See for Husqvarna H346SL